Frames, Doors & Partitions.
Commercial Specialty
Contractor.
We deliver precision installations and accessible spaces that keep your commercial project on schedule. We focus on quality craftsmanship and building lasting relationships with the contractors we serve.
Single Specialty Contractor Accountability
No more finger pointing between the frame crew and the door hanger.
-
✓Frames Set True: Welded drywall/masonry frames braced and checked with optical lasers across diagonal corners, plumb lines, and throat spreads.
-
✓Flawless Door Swinging: Doors hang naturally with exact 1/8" perimeter reveal tolerances because our team established the frame datum lines ourselves.
-
✓Full Division 10 Integration: Restroom compartment partitions, ADA grab bars, and washroom dispensers installed simultaneously on the same project mobilization.
Mission & Core Values
"We deliver precision installations and accessible spaces that keep your commercial project on schedule. We focus on quality craftsmanship and building lasting relationships with the contractors we serve."
Craftsmanship
We ensure every detail is installed perfectly to guarantee a flawless, plumb, and square finish that stands up to heavy commercial use.
Reliability
We show up on time, maintain rigorous job site communication, and keep our promises to keep the general contractor's critical path moving.
Compliance
We build strictly to 2010 ADA Standards and local Alabama building codes so your project passes official inspection the very first time.
Relationships
We value honesty, respect, and long-term partnerships with the project managers, superintendents, and trade partners we work alongside.
Specialized Installation Divisions
Turnkey field labor executing Division 8 frames, architectural wood/metal doors, hardware sets, and Division 10 restroom compartments across North & Central Alabama.
Hollow Metal Frame Setting
Masonry welded, existing opening retrofit & knock-down slip-ons.
- • Welded throat frames for CMU block wall integration
- • Drywall steel stud frame anchoring (strap & wire tie anchors)
- • Knock-Down (KD) 3-piece slip-on frames for finished drywall
- • Punch-and-dimple existing opening retrofit sleeve anchors
- • Mortar grout guards, plaster guards & electrical knockouts
Doors & Finish Hardware
Commercial flush wood, hollow metal slabs & Grade 1 mechanics.
- • Architectural solid core wood and heavy-gauge hollow metal doors
- • Standard & heavy ball-bearing hinges, continuous geared hinges
- • Mortise & cylindrical Grade 1 locksets, magnetic card locks
- • Rim panic exit devices, vertical rods & removable mullions
- • Hydraulic surface closers, coordinators & perimeter smoke seals
Commercial Toilet Partitions
Layout execution according to submittals & architectural plans.
- • Solid Plastic (HDPE) & Compact Phenolic Core systems
- • Powder-Coated Baked Enamel & Stainless Steel stalls
- • Overhead-Braced / Floor-Anchored pilaster layouts
- • Ceiling-hung & floor-to-ceiling privacy systems
- • Wheelchair accessible & ambulatory ADA stalls
Washroom Accessories
Laser-leveled fixture installation with verified backing.
- • ADA Grab Bars (36" rear, 42" side wall with 250+ lb load)
- • Combination Paper Towel Dispenser / Waste Receptacles
- • Commercial Electric Hand Dryers (surface & ADA recessed)
- • Channel Frame Stainless & Tilt ADA Commercial Mirrors
- • Fold-down baby changing tables & sanitary towel disposals
Alabama Commercial ADA & Field Tolerances
Strict adherence to frame clear openings, door operating forces, stall turnarounds, and accessory heights enforced by building officials across Huntsville, Birmingham, Decatur, and Cullman.
Frame Setting & Door Clear Width Requirements
Section 404 mandates a minimum 32-inch clear opening width measured between the face of the door leaf and the opposite stop with the door opened to 90 degrees.
Active Across North & Central Alabama
Our install vans operate continuously across the Tennessee Valley and Birmingham metro area. We carry our own frame clamps, laser transits, portable generators, SDS rotary hammers, and door jacks for complete jobsite independence.
Need immediate frame setting before drywall hangs or masonry completes?
Direct Call: (765) 414-1054
Submit Plans / Request Installation Proposal
Send us your door and frame schedules, hardware submittals, or restroom elevations. We turn around itemized labor quotes in 24–48 hours.
Request Received
Apex Estimating Team
, your RFP has been sent to our estimating desk. We'll review the drawings and frame/hardware schedules for and return your scope takeoff within 24–48 hours.